Introduction

Shower drains are an essential component of shower construction. It assists in draining water well and avoiding the formation of pools of water in the room since they are known sources of mold formation. Typically, center-positioned drains are used, but corner shower drains are more prevalent today because of their aesthetic appeal and utility. In this guide, you will learn about the main aspects of corner shower drain installation that you should know.

Part 1: Understanding Corner Shower Drains

Can a Shower Drain Be in the Corner?

Yes, the shower drain can be placed in the corner of the shower – it is a typical installation location. Placing the drain in the corner can offer several benefits, including:

• Aesthetic Appeal: Corner drains would make the space look contemporary and neat.
• Efficient Water Flow: Water is drained towards the four corners of the building, hence acts like a plus point of the building.
• Space Optimization: Corner drains can make the curb appeal more efficient and the laundry room bigger to hold more fixtures.

Standard Corner Shower Drain Dimensions

Corner shower drains come in various sizes, but the most common dimensions are:

• 4 inches x 4 inches: Suitable for designs that involve the bare minimum and do not require much space.
• 6 inches x 6 inches: A size that goes well for most showers, common in most showers.
• 8 inches x 8 inches: Utility for more extensive shower zones and more significant water pressure.

Importance of Correct Corner Shower Drain Placement

The correct orientation of the corner shower drain is important to ensure water flow and compliance with the general bathroom requirements. The proper positioning also means channeling the water in the appropriate direction, to the drain, and not in a pooled-up manner where it may cause damage.

Part 2: Preparatory Steps for Corner Shower Drain Installation

Choosing the Right Location

Deciding where to install a corner shower drain means considering the plumbing plan and shower style. Here’s how to do it:

• Plumbing Layout: Determine the direction the present plumbing lines take in your bathroom. Where these lines are drawn will determine where your drain may be installed.
• Shower Design: Consider the environment of your shower area. The tub drain should be placed in a manner that fits the architectural design of the space in which it is placed.

Slope Requirements

The shower floor and the enclosure also need to be sloped down towards the drain so that water doesn’t linger around. It is suggested that the slope should be about 1/4 inch per foot deep. This means that the floor level of the house should decrease by one-fourth of an inch for every foot, and the distance to the drain increases.

Measuring Correctly

Careful and accurate measurements must be taken when installing a corner shower drain. The placement of the chosen drain can be marked using the dimensions of the drain where it will be installed. When measuring the surface, it is important to consider the slope requirements.

Part 3: Step-by-Step Guide to Installing a Corner Shower Drain

Tools Required

• Measuring tape
• Level
• Screwdriver
• Adjustable wrench
• Pipe cutter
• PVC glue
• Silicone sealant
• Safety gloves
• Safety goggles

Safety Precautions

• This must be done while wearing safety gloves and goggles.
• You should also make sure there is no water supply throughout the entire process.
• Comply with all specifications provided by manufacturers for tools and equipment and all the materials being used.

Installation Steps

• Prepare the Area: First, clean the shower area and avoid having any objects on the floor. It is also important that the surface of the floor on which contact is to be made is clean and dry.
• Mark the Location: Take measurements on the ground using a measuring tape and level to establish the correct position of the drain. Double-check the measurements.
• Cut the Hole: Mark where you want to create the opening and make a hole using a pipe cutter. The hole should be slightly bigger than the drain so one can easily fix the drain properly.
• Install the Drain Pipe: Secure the drain pipe to the other plumbing fixture. Fasten the connections with PVC glue and tighten them to provide a water-tight seal.
• Place the Drain: Slide the drain into the hole. Ensure that it is properly fixed and at a level with the floor surface on which it was placed.
• Seal the Edges: Wipe the joint where the drain has been installed with silicone sealant to minimize water seepage.
• Test the Drain: Open and activate the water supply. It is ready, and then the drain is tested. Inspect whether the water leaks or stagnates anywhere and ensure the water drains in the right direction.

Part 4: Choosing the Right Manufacturer for Your Corner Shower Drain

Finding the Best Manufacturer

Selecting a corner shower drain requires one to be very careful since they have to identify a suitable manufacturer. Here are some tips:

• Reputation: Stick to manufacturers with a good reputation on the market or those recommended by others.
• Warranty: Evaluating whether the manufacturer has warranties on their products.
• Material Quality: Ensure that the drains used are of the highest quality to prevent them from getting easily rusted or worn out.

Introducing YZDRAIN

YZDRAIN is a widely recognized leader in the production of corner shower drains. Some of the clothing brands they feature are well-known for their unique designs and the quality of their products. Here are some features of YZDRAIN’s corner shower drains:

• Durable Materials: Constructed from stainless steel to minimize the wear and tear period and make it resistant to rusting.
• Easy Installation: It is easy to install and comes with straightforward user directions being followed during installation.
• Aesthetic Design: Contemporary styling and aesthetic looks that perfectly complement bathroom styling.
• Efficient Drainage: Designed to offer optimum water circulation while at the same time minimizing the blockage.

Conclusion

Corner shower drains can help you increase the practical area and become the focal point of the bathroom interior. Following the guide above will enable you to undertake the installation process correctly. Customers should select quality products from YZDRAIN to benefit from the better drain.

Frequently Asked Questions (FAQs)